CML can give you better quality laminates and lighter mouldings.

With a proven track record in producing high quality plugs, moulds and mouldings, CML has been using weight controlled wet lay-up techniques as well as resin infusion to perfect the quality of product being delivered to their clients. 

Recently there have been a few projects which CML took over from other moulders and the improvements made to production times and quality were drastic. Below are a couple of examples.

7M Keel boat being resin infused

 Example 1. 

10.5m Rescue RIB

Method of construction - Wet lay up Epoxy

Previous weight (by other manufacturer) – 1560kg

Weight achieved by CML – 1140kg. Saving of 420kg!  

CML pre-wetted the cloth before taking it onto the job, which saved production time and they controlled all materials by weighing them on and off the job.  

Example 2. 

9m Patrol Vessel

Method of construction - Wet lay up Polyester

Previous weight (by other manufacturer) – 2115kg

Weight achieved by CML – 1745kg. Saving of 370kg! 

Structure going into a 16M Pilot boat.

The feedback from customers is consistent - good quality, tidy laminates and excellent control. All material weights are recorded and monitored. This is backed up by CML building under Lloyd's Register's survey as well as running an ISO 9001 Quality Management System.  The facility is both monitored and climate controlled to ensure optimal manufacturing conditions.

To date any target weights set by customers have either been surpassed or achieved within 1%.   

Established in 2004, CML has 25 employees ranging from plug makers, laminators, shipwrights and naval architects. Their current facility can fit boats from 6m to 24m. The level of commercial quality achieved costs nowhere near as much as some of the bigger yards.  

If you have a new project or need to improve on an existing product, please do not hesitate to contact CML on 02380 660770 or email:info@compositemouldings.com.